Leaders in Quality Metal Manufacturing Since 1980
Our Line Up
Built with you in mind, we strive to build the best equipment for today's commercial industries.
- all
- Cattle
- Hog
- Bison
- Parks
- Custom
-
The Cypress Industries bunk feeder is available in either 12 or 14 gauge steel. They come with pre-drilled drain holes at each end. Our sturdy legs are formed from 1.25” square tubing; standard size is 10ft long X 29” wide and 28” high. They are made stackable for convenient storage and for transporting. They are acid washed and powder coated for extreme durability.
-
Our stationary feeders are waterproof, rodent proof and the all steel construction makes it a very durable feeder. The rugged construction allows this feeder to be used by bulls, horses and bison. Outside steps, internal ladder, handrails and a meshed catwalk over a tapered eve are standard. They also are 11ft wide to allow larger rain eves for superior feed protection. The feeder has large filling doors that are spring loaded for safety and ease of opening. With easily adjustable feed openings from 0-7” complete with stainless steel hardware. Standard sizes are 10ft – 400 Model, 15ft – 600 Model, 20ft – 800 Model and 30ft – 1200 Model.
-
At Cypress Industries, our creep feeders are a cut above the rest. They sit on a 10,000lb axle and have new 12.5L16 implement tires. All creep feeders come with spring assist fold up panels for fast efficient change from field to transport position. New more convenient panel configuration provides calves access on both ends and have a full length enter/exit areas for calves. When the panels are down in the feeding position, two braces securely hold the panels to eliminate shifting or rattling so the calves feel more comfortable entering the feeding area. No tools required to set up panels with the clip in braces.
The large weatherproof standard sliding filling lid is designed so you can fill the feeder with panels in transport position. Our creep feeders have several convenient features including stabilizing jacks front and back, a 5000lb top wind screw jack, stainless steel hardware on all adjustable feed openings and a peaked floor for complete clean out of feed. Sturdy steps allow you to climb the feeder and there is an ideal location for the mineral feeder on the rear.
The 100 Model has a new design with larger mangers for superior feed protection and is powder coated. They sit on an 8000lb axle and have 11L15-implemnt tires.
10ft portable feeders available in 100 Model-250 Model - and 330 Model. 15ft models in 375 Model and 495 Model and are easily towed by your truck.
Our 8ft 60 Model creep feeder sits on a 2” X 4” steel skid. It feeds on one side and has a fold up panel. Acid washed and powder coated. Feeder shown with panel in feeding position.
-
Our four sided bison feeder is designed primarily for buffalo. But due to the versatility of the feeder, it’s also used for horses and cattle. The open corners allow for peripheral vision so the animal does not feel confined. The hitch is removable and the swing up ladder creates a complete bump free zone. The headroom in the manger is wide enough for a bison head at 22+ inches. The feed openings are adjustable from 0-7” and has stabilizing jack stands front and back. The catwalk around the feeder protects the manger from moisture and allows easy access to the full size door for convenient filling. The durable feeder sits on a 10,000lb axle and has new 12.5L16 tires and rims for trouble free moving. The bison feeder also holds approximately 300 Models.
-
We have 3 standard models of hog feeders The 6ft X 10ft feeder feeds on 2 sides for a total of 20ft of eating room with 3 ½ tons of capacity. The 8ft X 8ft feeder feeds on all 4 sides for a total eating room of 32ft with 4 ½ tons of capacity. The 10ft X 10ft feeder feeds on all 4 sides for a total eating room of 40ft with 7 tons of capacity. All hog feeders have an interior cone and are recommended for bio-techs. The mangers have feed openings that are adjustable from 0-4” with stainless steel hardware. Grating is installed every 9” to help keep the hogs from rooting the feed out and from climbing in the manger. Lids and rain extensions are available.
-
Our standard fire box is 20” X 20” It has a hinged lid, a handle and is made from 10 gauge metal. The grill is made from ½” rod, and has 1 ½” air flow holes. This is the most common fire box for most campgrounds. We have two styles of large fire boxes 27” X 39” made from 3/16 plate. They have 1 ¼” air flow holes, stationary grill space and a warming edge. One has a hinged lid with chain and the other has a lid that swings to the side. This allows you to better control the temperature for cooking and is much easier to add more wood. Perfect for large back yards and group campsites. Our picnic table frame is manufactured from heavy gauge pipe and is powder coated. The design eliminates stress on the wood with the use of cross tubes, this also allows for easy entry. Our picnic table frames are available in both 6ft and 8ft. Hardware is provided to assemble the frame and attach the wood. We use special large flat head bolts for a smooth finish and are snag free. The unique design and rugged construction of our refuse containers make them idea for many locations. The back door swings completely out of the way and rubber stoppers keep the door from scuffing the side. The garbage bag cradle securely holds the bag and conveniently tilts back for changing. When changing the bag our design allow you to slide the full bag off the try and eliminates the need to lift the bag up and out. All refuse containers come with tabs designed to bolt to cement pads. Available in both single and double versions and powder coated for further longevity.
-
Our standard fire box is 20” X 20” It has a hinged lid, a handle and is made from 10 gauge metal. The grill is made from ½” rod, and has 1 ½” air flow holes. This is the most common fire box for most campgrounds.
About Us
Cypress Industries Ltd is located just north of Cypress River in southern Manitoba. It is owned and operated by Mr. Kelly Mauws. Cypress Industries has been a family owed company since its inception and became a limited company in 1982.
After several trail based feeders were manufactured for our own farm and a few neighbors it was apparent there was a growing market for quality metal feeders, and as they say the rest is history.
All of our feeders are manufactured from prime steel and acid washed. Most items are then processed with 2 coats of primer and 2 coats of industrial enamel in our modern down draft paint booth. Several items like our smaller creep feeders, bunks and park products are all powder coated. This process bakes the paint on at 375 degrees for a very durable long lasting finish.
To better serve our customers we have several pieces of equipment that are CNC controlled to ensure accuracy and reliability as well as a down draft liquid paint booth and powder coating system.
We at Cypress Industries strive to satisfy our customers. We believe in manufacturing quality products designed with convenient features and built to last.
We take great pride in our workmanship and want you to know that you have purchased the best quality available.
Our Services
Custom Design
We can create single custom pieces that fit your exact needs. We are able to customize our product in order to satisfy your requirements.
Manufacturing
We use only the highest grade products to build our equipment, leaving you with well built, durable and long lasting equipment.
Customer Satisfaction
We make sure our customers are taken care of for as long as they own a piece of our equipment.
Vision
We look to the future and in every direction when designing our equipment, to spot advantages in making every piece better.
Powder Coat Finish
Using the latest in Powder Coat Finishes you can rest assure your equipment will be protected from the elements.
The Build
No matter the size of the project you might have in mind we can create something that will help you complete your job practically and efficiently.